GPU Accelerated Lattice Boltzmann Simulation of a Cyanide-Release Accident in the Danjiangkou Reservoir

A graphics processing unit (GPU) accelerated two-dimensional contamination transport model is developed using the lattice Boltzmann method (LBM). The intrinsic parallel features of LBM make it particularly suitable for implementation on GPUs. After validation with two benchmarks, the model was applied to a cyanide-release accident in the Danjiangkou Reservoir, using a numerical combination of hydrodynamics and solute transport. The results show good agreement with an Environmental Fluid Dynamics Code (EFDC) model. A single GPU workstation speedup reaches 1.58 times that of a central processing unit (CPU) calculation alone. This speedup provides the opportunity for applying the model as a pollution accident information and decision support system for the Middle Route of the South to North Water Diversion Project in China.     

The Impact of Unilateral Commitment on Transboundary Pollution

To reach a common target of environmental quality, countries can choose to commit to a stream of pollution abatement right from the beginning of the game or decide upon abatement at each moment of time. Though most of the previous literature studies homogeneous strategies where no country or all countries commit to a (same) predefined policy, reality goes along a different way: some countries make more efforts than others to reduce pollutant emission. The main novelty of this paper resides in the introduction of this kind of heterogeneous strategic behavior currently observed among large pollution nations. We find that the pollution level can be lower under heterogeneous than under homogeneous strategies. A stringent environmental quality target will induce the committed player to produce an abatement effort that more than compensates the free-riding attitude of the non-committed player.     

Design,Modelling and Assessment of Emission Scenarios Resulting from a Network of Wood Biomass Boilers

The use of wood biomass as a fuel for domestic and industrial heating systems allows for a reduction of CO₂ emissions at a global scale, but it may also result in worse local air quality conditions, due to their emissions of particulate matter. The aim of this study is to assess the actual trend of atmospheric pollution in a study area, assuming that all heating systems are replaced by small size biomass boilers linked to the buildings through district heating network. Ground level concentrations of particulate matter, emitted by different heating systems, are therefore evaluated through numerical simulations performed by means of an atmospheric dispersion model (Sirane). As a first step, we have compared the environmental impact of a woodchip boilers network with that given by the use of traditional heating systems, i.e. wood stoves and natural gas boilers. As a second step, we have analysed the impact of such a network taking into account different emission scenarios, related to different boilers operating conditions. Results show that the environmental performances of a woodchip boilers network can be optimized by combining it with other renewable sources of energy devoted to the supply of hot water. The adopted analysis methodology can be applied to other real or hypothetic punctual sources on the territory.     

Life cycle assessment tool of electricity generation in Portugal

This paper investigates multi-stakeholder arrangements initiated by businesses and NGOs from the North that aim to enhance a more sustainable agricultural production at specific localities in Southern countries. We aim to better understand the search for concerted action in multi-actor arrangements. Therefore, this paper presents a diagnostic framework with three strategic challenges the partnership projects are facing: linking global economic objectives to local needs, values and interests; bridging public and private interests and responsibilities; and seeking trade-offs between social, environmental and economic values. Starting from the partnerships’ Theory of Change, this diagnostic framework is applied to comparative case studies of partnership projects in the cocoa sector in Indonesia, which are part of a Northern-based public–private partnership to improve farmers’ prospective. It is concluded that the economic reality faced by the farmers differs from that of the Northern actors; collaboration with governments is difficult because of different organizational cultures; and the partnership projects underestimate the strength of vested social relations the smallholders are part of. Overall, the initiators of the partnerships seem to work with a too restricted economic interpretation of the local reality.     

Quantification of forest fragmentation in pre- and post-establishment periods,inside and around Apuseni Natural Park,Romania

Protected areas (PAs) represent real cornerstones in the conservation of biodiversity and natural habitats. Their protection must be a priority today for each society. The enhanced socio-economic requirements increase the pressure upon protected areas, and the effect can result in a reduction of biodiversity. The aim of this study is to quantify forest fragmentation in the pre- (1986–2002) and post-establishment (2002–2016) periods, inside and around (buffer 1, buffer 2 and buffer 3) Apuseni Natural Park (ANP), Romania, using a series of classified Landsat satellite images and six landscape metrics. The results show that forest fragmentation occurred both in the pre- and post-establishment periods, inside and around ANP. Inside the park, the deforestation rate increased four times, from 0.03% year^?1 in the pre-establishment period to 0.14% year^?1 in the post-establishment period. Around the park, the deforestation rate decreased from 0.31% year^?1 in the pre-establishment period (buffer 1) to 0.10% year^?1 in the post-establishment period (buffer 1). Forest fragmentation resulted in an increase in the patch density and edge density, and a decrease in the total core area and mean patch size leading to isolation of patches and fragmentation of landscape, especially in ANP in the post-establishment period. Several measures can be taken in order to stop forest fragmentation inside and around ANP, including the education of buffer-zone communities, reforestation, enforcement of park regulations, and forest legislation.     

Performance of Cow Dung Reinforced Biodegradable Poly(Lactic Acid) Biocomposites for Structural Applications

In this work, performance of cow dung (CD) reinforced poly(lactic acid) (PLA) biocomposites was investigated for the potential use in load bearing application. CD of average 4 mm size was blended with PLA at different CD ratios (0–50 wt%) and their effects on the biocomposite properties were studied. The results showed an improvement in the flexural properties, while the tensile and impact strength dropped by 20 and 28% with the addition of 50% CD. The decline in the tensile and impact strength was due to micro-cracking and voids formation at higher CD content. Also, the incorporation of CD slightly decreased the thermal stability of the biocomposite. However, dynamic mechanical properties of the biocomposites generally improved. SEM analysis of tensile and impact fractured surfaces indicated that the CD had a reasonable adhesion with matrix. Moreover, the SEM micrographs of soil burial studies showed an accelerated degradation of higher CD wt% biocomposites.     

Photo-Stabilisation and UV Blocking Efficacy of Coated Macro and Nano-Rutile Titanium Dioxide Particles in Paints and Coatings

Surface treated macro and nanoparticle TiO₂ samples have been prepared, characterised and their efficiency as UV blockers evaluated in clear coatings and paints. The particle size of the ‘base’ TiO₂ has been optimised to block UV radiation and the surface treatment developed to deactivate the photocatalytic activity of the surface of the TiO₂ particles. The resultant UV blockers have been evaluated in both solvent and water-based clear coatings. Nanoparticle TiO₂ has been prepared from ‘seed’ and the particle size was controlled by calcination. It was found that the choice of particle size is a compromise between UVA absorption, UVB absorption, visible transmission and photoactivity. It has been demonstrated that TiO₂ with a crystallite size of 25 nm yields a product with the optimum properties. A range of dispersants was successfully used to disperse and mill the TiO₂. Both organic and inorganic dispersants were used; 2-amino-2-methyl-1-propanol and 1-amino-2-propanol (MIPA) and P₂O₅ and Na₂SiO₃ respectively. The surface of the nano-TiO₂ was coated with mixed oxides of silicon, aluminium, zirconium and phosphorous. Addition of the resultant coated nano-rutiles to an Isocyanate Acrylic clear coating prolonged the lifetime of that coating compared to the blank. Generally, a surface treatment based on SiO₂, Al₂O₃ and P₂O₅ was more successful than one based on ZrO₂, Al₂O₃ and P₂O₅. Higher addition levels of the surface treatment were beneficial for protecting the polymeric coating. The UV blocker products were also evaluated in a water-based acrylic, first a water-based dispersion of the UV blocker was prepared before addition to the acrylic. The dispersions and resultant acrylic thin films were evaluated using UV/Vis spectroscopy and durability assessed. The ratio of absorbance at 300:500 nm for the water-based dispersion was shown to be a good predictor of both the transparency of the resultant acrylic thin film and the durability of that film, in terms of weight loss. Macro grade titanium dioxide pigments were also prepared and coated with treatments of silica, alumina and siloxane and their photo-stabilising activity in alkyd paint film assessed and found to be directly related to the electron–hole pair mobility and trapping as determined by micro-wave spectroscopy.     

Influence of Short Central PEO Segment on Hydrolytic and Enzymatic Degradation of Triblock PCL Copolymers

Hydrolytic, enzymatic degradation and composting under controlled conditions of series of triblock PCL/PEO copolymers, PCEC, with central short PEO block (M _n 400 g/mol) are presented and compared with homopolymer (PCL). The PCEC copolymers, synthesized via ring-opening polymerization of ε-caprolactone, were characterized by ¹H NMR, quantitative ¹³C NMR, GPC, DSC and WAXS. The introduction of the PEO central segment (<?2 wt%) in PCL chains significantly affected thermal degradation and crystallization behavior, while the hydrophobicity was slightly reduced as confirmed by water absorption and moisture uptake experiments. Hydrolytic degradation studies in phosphate buffer after 8 weeks indicated a small weight loss, while FTIR analysis detected changes in crystallinity indexes and GPC measurements revealed bulk degradation. Enzymatic degradation tested by cell-free extracts containing Pseudomonas aeruginosa PAO1 confirmed high enzyme activity throughout the surface causing morphological changes detected by optical microscopy and AFM analysis. The changes in roughness of polymer films revealed surface erosion mechanism of enzymatic degradation. Copolymer with the highest content of PEO segment and the lowest molecular weight showed better degradation ability compared to PCL and other copolymers. Furthermore, composting of polymer films in a model compost system at 37 °C resulted in significant degradation of the all synthesized block copolymers.